| For
Sale |
||
Feel free to make me an offer on any of the parts listed below. Call Shannon at 570-441-4692 or email at shannonmausteller@hotmail.com |
||
NEW 2010 Mach 1 chassis and body  New 2010 Mach 1 chassis. Frame is an 87/40 with a raised rail. This car is powdercoated gloss black with a painted red Shark hood from TQ Fiberglass. Car has never been raced, never been on the track, never fired, etc. We put the car together and used as a show car. Car comes as shown in the picture ie chassis, body, bushings. Car in located in Bloomsburg, PA. $3,400 |
||
Antique / Vintage Sprint Car Frame  I believe this is a mid 80s sprint car frame. There was a lot of discussion but it appears to be a Ben Cook copy of a Trostle. I don't really have any information on where this car came frame or who ran it. But it's solid and I don't see any bent tubes or places where the frame has been clipped or fixed. Car is located in Bloomsburg, PA. $600 |
||
 Autolite 51 Spark Plug |
 Autolite Spark Plugs 3933 Set of 6 |
 Autolite 4132 Spark Plugs Set of 4 |
 3 ton manual chain hoist $50 |
 Louver Panels |
 Champion L86C Spark Plugs (set of 3) |
 Mausteller Racing Hat black w/red bill $15 |
 Mausteller Racing T-Shirt LG & X-LG $15 |
Midget Wide Gears(Winters) (1.25 inches) 1 (24T - 24T) = 3.78 2 (23T - 24T) = 3.94 3 (23T - 25T) = 4.10 3A (22T - 25T) = 4.29 4 (22T - 26T) = 4.46 4A (19T - 23T) = 4.57 5 (21T - 26T) = 4.68 8 (20T - 28T) 5.29 10 (24T - 35T) = 5.51 24 (23T - 30T) = 4.93 $25 each |
 Golf Cart Body E-Z Go |
 New Fuel Filter Bracket 2" hole for filter with set screw 1 3/8" hole for frame rail |
|
 2 Maple Drawers Measure 19 5/8" long, 14 3/4" wide, 3 7/8" tall (on the outside). With the hinges the drawer is 15 7/8" wide by 22" long. Solid wood construction, dovetail joints, and roller bearing slides. Drawers do not contain cabinet fronts. |
 New aluminum shock pin kit. Pins come with spacers, release pins, and nuts |
 Set of 2 aluminum shock pins. Pins come with spacer, release pin, and nut. 20 laps on pins. Shafts are 1/2" x 3 3/4" |
 Rocker Stud Girdle |
 Diamond Plate Running Board Fits 1986 GMC Dually 37" Long X 12" Wide (at widest point) X 7 1/4" (at smallest point) |
 Wing Dynamics Front Wing Side panels powdercoated red |
 Set of Air bags for tractor or trailer |
 39th Annual Knoxville Nationals Program with Patch |
 Plastic Arm Guard from a John Heydenreich sprint car |
 LR Duralite Wheel half (sprint car) Beadlock 6" inner half will also fit sanders |
 Wheel wrench to fit vintage knock-offs |
 Side Panels for top of cockpit. Decals are removable. Fits most frames |
 Rear Wing Brackets |
 Fuel Plate 11 5/8" X 7 3/4 X 3/16" thick |
|
 Crank to Universal Joint adapter for midget |
 Sail Panel for standard cage maxim or mach-1 |
 Koni Shock, adjustable 82W-2277 10" body, 7 1/2" shaft |
 Oil Tank - Side Mount |
 Universal Joint (Dana Spicer) 5-153X |
 Front Belt Drive |
 Catch Can - Cylinder |
 Antique Pedal |
 Clamp On Panhard Bar Mount for Midget or Micro 7/8" bolt fits 1" - 1 1/8" tube |
 Radiator Fill Tank |
 Air Box Shield |
 Antique oil filter with screen |
 |
 Ben Cook Power Steering Bracket |
 Power Steering Mounting Bracket |
 Oil Tank $50 |
 Shaw Motor Plate Made by Jenkins |
 Antique Canister |
 dial-a-jet |
 Midget Springs 375 (2) |
 Midget Springs 350 & 325 |
 Duralite sprint car Wheel Center - 9 3/4" bolt pattern - 5/8" holes |
 Duralite Midget Wheel Center - 10" bolt pattern - 1/2" holes |
 Antique Steel Torsion Arm 13 1/2" long X 3/4" thick 3/4" splined hole |
 Midget Beadlock Possibly Marsh Wheels |
 Midget Beadlock Possibly Marsh Wheels |
 Midget Beadlock Possibly Marsh Wheels |
 Front Stabilizer with Arms and Spare Stabilizer |
 Sprint Car Beadlock Real Wheels |
 Sprint Car Beadlock |
 Sprint Car Beadlock |
 Sprint Car Beadlock |
 Midget Beadlock |
 Sprint Car Beadlock |
 Sprint Car Beadlock |
 Sprint Car Beadlock |
 Sprint Car Beadlock Sanders Wheels |
 Sprint Car Beadlock |
|
